Parts illustration
Click on image to enlarge
Sprite-Midget 1964-’80: Grommets, blanking plugs and mirrors
PDF catalogue - page 99 • The following parts are available in this group.
Stock info sufficient stock / low or 1 in stock / Out of stock. / Not available
Please contact us for correct delivery times & price info, when a part is not in stock.
Illu. N° View details Part N° Description EUR
excl. VAT
EUR
incl. VAT
Situ./ Stock QTY REQ
1 122.166 Plug, jacking hole - up to GAN6 157671 use 2, GAN6 157672 use 4 1.30 1.57
2 122.186 Plug, floor hole - oval 6.28 7.60
3 122.170 Plug, clutch slave cylinder - 1098/1275 models 0.00 0.00
4 122.169 Plug, gearbox filler hole - 1098/1275 models 2.62 3.17
5 122.020 Plug, rear cross panel - 3/8” 0.42 0.51
6 122.167 Plug, propeller shaft access - 1” 2.26 2.73
7 052.054 Plug, ignition switch hole - 3/4” USE 052.030
7 052.030 Blanking plug, when steering lock is fitted 2.25 2.72
8 122.030 Plug, steering column hole - 1.1/2” 1.29 1.56
9 122.174 Plug, footwell side - 3/8” 0.45 0.54
10 122.173 Plug, safety belt fixing hole - 3/8” 0.70 0.85
11 122.026 Plug, mud shield - 1” 0.62 0.75
12 122.027 Plug, foot well top - 5/8” 0.29 0.35
13 122.319 Plug, dash 0.00 0.00 NA

14 161.063 D’ Nut chrome plated 5.44 6.58
15 164.002 Washer, spring 0.12 0.15
16 163.001 Washer, plain 0.29 0.35
17 122.020 BLANKING GROMMET To fit hole size 3/8” - 9.5 mm 0.42 0.51
17 122.021 BLANKING GROMMET To fit hole size 1/2” - 12.7 mm 0.48 0.58
17 122.022 BLANKING GROMMET To fit hole size 3/4” - 19.0 mm 0.35 0.42
17 122.025 BLANKING GROMMET To fit hole size 1/4” - 6.3 mm 0.16 0.19
17 122.026 BLANKING GROMMET To fit hole size 1” - 25.4 mm 0.62 0.75
17 122.027 BLANKING GROMMET To fit hole size 5/8” - 15.8 mm 0.29 0.35
17 122.188 BLANKING GROMMET To fit hole size 5/16”- 7.9 mm 0.82 0.99
17 122.189 BLANKING GROMMET To fit hole size 7/8” - 22.4 mm 0.64 0.77
17 122.204 BLANKING GROMMET To fit hole size 3/16”- 4.7 mm 1.00 1.21
Parts illustration
Click on image to enlarge
Sprite-Midget 1964-’80: Grommets, blanking plugs and mirrors
PDF catalogue - page 99 • The following parts are available in this group.
Stock info sufficient stock / low or 1 in stock / Out of stock. / Not available
Please contact us for correct delivery times & price info, when a part is not in stock.
Illu. N° View details Part N° Description EUR
excl. VAT
EUR
incl. VAT
Situ./ Stock QTY REQ
1 122.166 Plug, jacking hole - up to GAN6 157671 use 2, GAN6 157672 use 4 1.30 1.57
2 122.186 Plug, floor hole - oval 6.28 7.60
3 122.170 Plug, clutch slave cylinder - 1098/1275 models 0.00 0.00
4 122.169 Plug, gearbox filler hole - 1098/1275 models 2.62 3.17
5 122.020 Plug, rear cross panel - 3/8” 0.42 0.51
6 122.167 Plug, propeller shaft access - 1” 2.26 2.73
7 052.054 Plug, ignition switch hole - 3/4” USE 052.030
7 052.030 Blanking plug, when steering lock is fitted 2.25 2.72
8 122.030 Plug, steering column hole - 1.1/2” 1.29 1.56
9 122.174 Plug, footwell side - 3/8” 0.45 0.54
10 122.173 Plug, safety belt fixing hole - 3/8” 0.70 0.85
11 122.026 Plug, mud shield - 1” 0.62 0.75
12 122.027 Plug, foot well top - 5/8” 0.29 0.35
13 122.319 Plug, dash 0.00 0.00 NA

14 161.063 D’ Nut chrome plated 5.44 6.58
15 164.002 Washer, spring 0.12 0.15
16 163.001 Washer, plain 0.29 0.35
17 122.020 BLANKING GROMMET To fit hole size 3/8” - 9.5 mm 0.42 0.51
17 122.021 BLANKING GROMMET To fit hole size 1/2” - 12.7 mm 0.48 0.58
17 122.022 BLANKING GROMMET To fit hole size 3/4” - 19.0 mm 0.35 0.42
17 122.025 BLANKING GROMMET To fit hole size 1/4” - 6.3 mm 0.16 0.19
17 122.026 BLANKING GROMMET To fit hole size 1” - 25.4 mm 0.62 0.75
17 122.027 BLANKING GROMMET To fit hole size 5/8” - 15.8 mm 0.29 0.35
17 122.188 BLANKING GROMMET To fit hole size 5/16”- 7.9 mm 0.82 0.99
17 122.189 BLANKING GROMMET To fit hole size 7/8” - 22.4 mm 0.64 0.77
17 122.204 BLANKING GROMMET To fit hole size 3/16”- 4.7 mm 1.00 1.21
Sprite-Midget 1964-’80: Grommets, blanking plugs and mirrors
PDF catalogue - page 99 • The following parts are available in this group.
Click here to show image
click on a section of the image to magnify it.
Sprite-Midget 1964-’80: Grommets, blanking plugs and mirrors

Stock info sufficient stock / low or 1 in stock / Out of stock. / Not available
Please contact us for correct delivery times & price info, when a part is not in stock.
Illu. N° View details Part N° Description EUR
excl. VAT
EUR
incl. VAT
Situ./ Stock QTY REQ
1 122.166 Plug, jacking hole - up to GAN6 157671 use 2, GAN6 157672 use 4 1.30 1.57
2 122.186 Plug, floor hole - oval 6.28 7.60
3 122.170 Plug, clutch slave cylinder - 1098/1275 models 0.00 0.00
4 122.169 Plug, gearbox filler hole - 1098/1275 models 2.62 3.17
5 122.020 Plug, rear cross panel - 3/8” 0.42 0.51
6 122.167 Plug, propeller shaft access - 1” 2.26 2.73
7 052.054 Plug, ignition switch hole - 3/4” USE 052.030
7 052.030 Blanking plug, when steering lock is fitted 2.25 2.72
8 122.030 Plug, steering column hole - 1.1/2” 1.29 1.56
9 122.174 Plug, footwell side - 3/8” 0.45 0.54
10 122.173 Plug, safety belt fixing hole - 3/8” 0.70 0.85
11 122.026 Plug, mud shield - 1” 0.62 0.75
12 122.027 Plug, foot well top - 5/8” 0.29 0.35
13 122.319 Plug, dash 0.00 0.00 NA

14 161.063 D’ Nut chrome plated 5.44 6.58
15 164.002 Washer, spring 0.12 0.15
16 163.001 Washer, plain 0.29 0.35
17 122.020 BLANKING GROMMET To fit hole size 3/8” - 9.5 mm 0.42 0.51
17 122.021 BLANKING GROMMET To fit hole size 1/2” - 12.7 mm 0.48 0.58
17 122.022 BLANKING GROMMET To fit hole size 3/4” - 19.0 mm 0.35 0.42
17 122.025 BLANKING GROMMET To fit hole size 1/4” - 6.3 mm 0.16 0.19
17 122.026 BLANKING GROMMET To fit hole size 1” - 25.4 mm 0.62 0.75
17 122.027 BLANKING GROMMET To fit hole size 5/8” - 15.8 mm 0.29 0.35
17 122.188 BLANKING GROMMET To fit hole size 5/16”- 7.9 mm 0.82 0.99
17 122.189 BLANKING GROMMET To fit hole size 7/8” - 22.4 mm 0.64 0.77
17 122.204 BLANKING GROMMET To fit hole size 3/16”- 4.7 mm 1.00 1.21
Sprite-Midget 1964-’80: Grommets, blanking plugs and mirrors
PDF catalogue - page 99

Click here to show image
click on a section of the image to magnify it.

Sprite-Midget 1964-’80: Grommets, blanking plugs and mirrors
Illu. N° Part N° Description
1 122.166 Plug, jacking hole - up to GAN6 157671 use 2, GAN6 157672 use 4 Info
2 122.186 Plug, floor hole - oval Info
3 122.170 Plug, clutch slave cylinder - 1098/1275 models Info
4 122.169 Plug, gearbox filler hole - 1098/1275 models Info
5 122.020 Plug, rear cross panel - 3/8” Info
6 122.167 Plug, propeller shaft access - 1” Info
7 052.054 Plug, ignition switch hole - 3/4” USE 052.030
7 052.030 Blanking plug, when steering lock is fitted Info
8 122.030 Plug, steering column hole - 1.1/2” Info
9 122.174 Plug, footwell side - 3/8” Info
10 122.173 Plug, safety belt fixing hole - 3/8” Info
11 122.026 Plug, mud shield - 1” Info
12 122.027 Plug, foot well top - 5/8” Info
13 122.319 Plug, dash Info
14 161.063 D’ Nut chrome plated Info
15 164.002 Washer, spring Info
16 163.001 Washer, plain Info
17 122.020 BLANKING GROMMET To fit hole size 3/8” - 9.5 mm Info
17 122.021 BLANKING GROMMET To fit hole size 1/2” - 12.7 mm Info
17 122.022 BLANKING GROMMET To fit hole size 3/4” - 19.0 mm Info
17 122.025 BLANKING GROMMET To fit hole size 1/4” - 6.3 mm Info
17 122.026 BLANKING GROMMET To fit hole size 1” - 25.4 mm Info
17 122.027 BLANKING GROMMET To fit hole size 5/8” - 15.8 mm Info
17 122.188 BLANKING GROMMET To fit hole size 5/16”- 7.9 mm Info
17 122.189 BLANKING GROMMET To fit hole size 7/8” - 22.4 mm Info
17 122.204 BLANKING GROMMET To fit hole size 3/16”- 4.7 mm Info