Sprite-Midget 1964-’80: Carburettor parts and fuel system improvements

Sprite-Midget 1964-’80: Carburettor parts and fuel system improvements
PDF catalogue - page 117 • The following parts are available in this group.

Stock info sufficient stock / low or 1 in stock / Out of stock. / Not available
Please contact us for correct delivery times & price info, when a part is not in stock.

Part N°	Description	EUR excl. VAT	EUR incl. VAT	Situ./ Stock
016.169	Gasket manifold	1.47	1.78
012.401	Sleeve cylinder head	2.11	2.55
101.580	K&N Ram pipe for SU HS2 1.1/4”. Improves aiflow, use them with K&N airfilters	0.00	0.00	POR
101.230	K&N Ram pipe for SU HS4 1.1/2”. Improves aiflow, use them with K&N airfilters	43.03	52.07
101.581	Ram pipe for SU HS2 1.1/4”. When the air filters are not fitted. Made from spun alloy tubes with radius and a mesh guard.	0.00	0.00	POR
101.146	Ram pipe for SU HS4 1.1/2”. When the air filters are not fitted. Made from spun alloy tubes with radius and a mesh guard.	32.10	38.84
101.422	Breather hose adapter. 1/2” FLANGE, 3/4”long	39.24	47.48
~~102.216~~	~~Grosse Jet, Needle & seat improvement. This efficient fuel cut-off is based on a ball system. This will be the last one you order.~~	USE 102.156
102.156	Needle and seat, HS4 & HIF 4V	21.24	25.70
200.572	Carburettor synchroniser	58.43	70.70
102.302	Tool kit, 3 piece	47.90	57.96
011.756	K&N breather filter. Steel base plate, O.D. 1/2”	45.26	54.76
011.757	K&N breather filter. Clamp-on, I.D. 1/2”	36.33	43.96
101.825	Spacer with vacuum breather. 7,5 mm thick, HS2 1.1/4”	0.00	0.00	POR
101.826	Spacer with vacuum breather. 7,5 mm thick, HS4 1.1/2”	0.00	0.00	POR
011.753	Hose. Timing cover to ‘Y’ piece or breather hose for single carb.	7.94	9.61
011.755	Hose. From ‘Y’ piece to oil seperator	30.00	36.30	NA
011.160	‘Y’. Black plastic piece	2.81	3.40
011.754	Hose. From carb. to ‘Y’ piece	5.32	6.44
162.084	Plug, 5/8” UNF	10.11	12.23
162.029	Screw, 1/4” UNF. holds up locating plate	0.48	0.58
172.027	Fastener for accelerator cable	5.38	6.51
163.033	Washer, oval. 2 holes to hold a spring	2.56	3.10
171.011	Return spring	1.26	1.52
101.391	Throttle cable locating plate	12.27	14.85
011.073	Vacuum adaptor. For servo, 5/8” UNF	18.80	22.75

Sprite-Midget 1964-’80: Carburettor parts and fuel system improvements
PDF catalogue - page 117 • The following parts are available in this group.

Stock info sufficient stock / low or 1 in stock / Out of stock. / Not available
Please contact us for correct delivery times & price info, when a part is not in stock.

Part N°	Description	EUR excl. VAT	EUR incl. VAT	Situ./ Stock
016.169	Gasket manifold	1.47	1.78
012.401	Sleeve cylinder head	2.11	2.55
101.580	K&N Ram pipe for SU HS2 1.1/4”. Improves aiflow, use them with K&N airfilters	0.00	0.00	POR
101.230	K&N Ram pipe for SU HS4 1.1/2”. Improves aiflow, use them with K&N airfilters	43.03	52.07
101.581	Ram pipe for SU HS2 1.1/4”. When the air filters are not fitted. Made from spun alloy tubes with radius and a mesh guard.	0.00	0.00	POR
101.146	Ram pipe for SU HS4 1.1/2”. When the air filters are not fitted. Made from spun alloy tubes with radius and a mesh guard.	32.10	38.84
101.422	Breather hose adapter. 1/2” FLANGE, 3/4”long	39.24	47.48
~~102.216~~	~~Grosse Jet, Needle & seat improvement. This efficient fuel cut-off is based on a ball system. This will be the last one you order.~~	USE 102.156
102.156	Needle and seat, HS4 & HIF 4V	21.24	25.70
200.572	Carburettor synchroniser	58.43	70.70
102.302	Tool kit, 3 piece	47.90	57.96
011.756	K&N breather filter. Steel base plate, O.D. 1/2”	45.26	54.76
011.757	K&N breather filter. Clamp-on, I.D. 1/2”	36.33	43.96
101.825	Spacer with vacuum breather. 7,5 mm thick, HS2 1.1/4”	0.00	0.00	POR
101.826	Spacer with vacuum breather. 7,5 mm thick, HS4 1.1/2”	0.00	0.00	POR
011.753	Hose. Timing cover to ‘Y’ piece or breather hose for single carb.	7.94	9.61
011.755	Hose. From ‘Y’ piece to oil seperator	30.00	36.30	NA
011.160	‘Y’. Black plastic piece	2.81	3.40
011.754	Hose. From carb. to ‘Y’ piece	5.32	6.44
162.084	Plug, 5/8” UNF	10.11	12.23
162.029	Screw, 1/4” UNF. holds up locating plate	0.48	0.58
172.027	Fastener for accelerator cable	5.38	6.51
163.033	Washer, oval. 2 holes to hold a spring	2.56	3.10
171.011	Return spring	1.26	1.52
101.391	Throttle cable locating plate	12.27	14.85
011.073	Vacuum adaptor. For servo, 5/8” UNF	18.80	22.75

Sprite-Midget 1964-’80: Carburettor parts and fuel system improvements
PDF catalogue - page 117

Part N°	Description
016.169	Gasket manifold	Info
012.401	Sleeve cylinder head	Info
101.580	K&N Ram pipe for SU HS2 1.1/4”. Improves aiflow, use them with K&N airfilters	Info
101.230	K&N Ram pipe for SU HS4 1.1/2”. Improves aiflow, use them with K&N airfilters	Info
101.581	Ram pipe for SU HS2 1.1/4”. When the air filters are not fitted. Made from spun alloy tubes with radius and a mesh guard.	Info
101.146	Ram pipe for SU HS4 1.1/2”. When the air filters are not fitted. Made from spun alloy tubes with radius and a mesh guard.	Info
101.422	Breather hose adapter. 1/2” FLANGE, 3/4”long	Info
~~102.216~~	~~Grosse Jet, Needle & seat improvement. This efficient fuel cut-off is based on a ball system. This will be the last one you order.~~	USE 102.156
102.156	Needle and seat, HS4 & HIF 4V	Info
200.572	Carburettor synchroniser	Info
102.302	Tool kit, 3 piece	Info
011.756	K&N breather filter. Steel base plate, O.D. 1/2”	Info
011.757	K&N breather filter. Clamp-on, I.D. 1/2”	Info
101.825	Spacer with vacuum breather. 7,5 mm thick, HS2 1.1/4”	Info
101.826	Spacer with vacuum breather. 7,5 mm thick, HS4 1.1/2”	Info
011.753	Hose. Timing cover to ‘Y’ piece or breather hose for single carb.	Info
011.755	Hose. From ‘Y’ piece to oil seperator	Info
011.160	‘Y’. Black plastic piece	Info
011.754	Hose. From carb. to ‘Y’ piece	Info
162.084	Plug, 5/8” UNF	Info
162.029	Screw, 1/4” UNF. holds up locating plate	Info
172.027	Fastener for accelerator cable	Info
163.033	Washer, oval. 2 holes to hold a spring	Info
171.011	Return spring	Info
101.391	Throttle cable locating plate	Info
011.073	Vacuum adaptor. For servo, 5/8” UNF	Info